Main features: 1, interpenetrating mesh coating. Excellent corrosion resistance by CSM coal tar epoxy paint on coal tar epoxy paint rubber modified conventional coal tar epoxy, making it the cured epoxy resin is formed between the chain and the interaction between the rubber chain wear mesh anti-corrosion coating, with low water absorption, water resistance, resistance to microbial erosion ability, high resistance to penetration. 2, corrosion excellent overall performance. As a result of the excellent corrosion resistance of rubber-modified, so that the physical and mechanical properties of the coating, electrical insulation, wear resistance, stray current performance, heat resistance, heat resistance and other better. 3, a film thickness. Low solvent content, a film thickness, less number of road construction, construction method and the traditional coal tar epoxy coating same. Main purpose: used for permanent or part immersed underwater steel structures, chemical plants, sewage treatment pond, buried pipelines and refinery steel tank; laying concrete structure, gas tank wall, floor, car chassis, cement products, coal mine stent, underground mining facilities and marine terminal facilities, wood products, underwater structures, piers steel bar, heating pipes, water pipes, gas pipes, cooling water, oil pipelines. Technical requirements: HG / T 2884-1997 epoxy asphalt anticorrosive paint (repackaging) Construction of reference: 1. Preparation method: The paint bucket and stir until thoroughly no bottom sediment, under stirring by paint: curing agent is 10: 1 (weight ratio) were added special hardener and stir well, coating formulated for 10 to 15 minutes before use. 2, the surface treatment requirements: Steel structure, substrate processing required to achieve the standard Sa2.5 grade rust or rust by hand; chemical rust may also be required to achieve no oil, no rust, no foreign body, dry and clean, with the exception stainless steel substrate surface after shall within four hours priming. 3, Construction Points for Attention: ① weld steel surface is required to achieve surface without edges, smooth, no weld flash, no glitches. If the weld is higher than 2mm, then with a primer and talcum powder into a suitable viscosity of putty, wipe dry after the primer surface on both sides of the weld, and evenness, making the transition surface to avoid when wrapped around the glass cloth vacuum; when ② thickly coated construction, so as not to flow is appropriate, when formulating generally do not join a diluent, but if the ambient temperature is too low, a large viscosity, can add thinner 1% to 5%, while appropriate to increase the curing agent ; ③ when construction shall pay attention to weather and temperature changes, rain, fog, snow or relative humidity greater than 80%, not construction; ④ thickness glass cloth is preferably 0.1mm or 0.12mm, latitude and longitude density of 12 × 10 root / c㎡ or 12 × 12 yarns / c㎡ specifications or alkali degreasing alkali glass cloth, glass cloth after wet should be dried before use; ⑤ mending method: FJC take anti-corrosion coating layer of the tubular body take not less than 100mm, the surface treatment is required to achieve lap St3, wipe, no dirt; ⑥ wound up methods: First remove the coating has been injured, if not reveal the base, just fill in the coatings, glass cloth mesh finish has been filled; ⑦ visual inspection: for coating pipes shall check by the root, and to do anti-corrosion coating smooth, no wrinkles and blow. Pinhole inspection: Available spark leak testing, the rating of 2000V, to strengthen the level of 3000V, especially to strengthen the level of 5000V, an average of 45 meters per spark no more than one, is qualified. If failed, pinhole shall be painted up. 4. Theoretical spreading consumption: If you do not consider the impact of the actual construction environment when painting, coating method, coating technology, surface condition and structure, shape, size, and so the surface area, the general consumption of paint per square meter is about: Light Level: Primer 0.23kg / m, paint 0.36kg / m; general level: Primer 0.24kg / m, paint 0.5kg / m; in class: Primer 0.25kg / m, paint 0.75kg / m ; to strengthen the level: Primer 0.26kg / m, paint 0.88kg / m; special strengthening class: Primer 0.27kg / m, paint 1.11kg / m. Transport, Storage: 1. When transporting, should prevent rain, sunlight exposure, to avoid the collision, and shall comply with the relevant provisions of the transportation sector. 2, the product should be stored in a cool ventilated place to prevent direct sunlight, Isolated fire source, far away from a heat source. Security: the construction site should have good ventilation, painters should wear glasses, gloves, masks, avoid skin contact and inhalation of mist. The scene strictly forbids fireworks. Painting package: Trial Substrate: Steel cement Trial Primer: coal tar epoxy primer