Heat shrinkable sleeve Description: Commonly known as dead heat shrink sleeve, heat shrinkable sleeve epoxy primer layer is coated on the surface of the steel pipe, the middle layer of hot melt adhesive, the outer improvement of radiation cross-linked polyethylene substrate. Features: - High mechanical strength, anti-aging ability. - Good resistance to environmental stress performance. - Excellent adhesive properties. - Easy to use. Heat shrinkable sleeve Application Guide: Standard: SY / T 0413-2002, NACE RP0303-2003SY / T 0413-2002, NACE RP0303-2003 maximum operating temperature: 60 ℃ applicable outside anticorrosion coating: PE, FBE, PP pipe preheat Temperature: 75 ℃ recommended rust rating: Sa 2.5 Specifications: The product can be used for all pipe DN25-DN1000 substrate thickness from 1.0-2.0mm, 0.8-2.0mm shrink sleeve layer thickness from use folding Code: thermal units In the late nineties used in the oil and gas industry, long-distance transport of oil, gas pipe weld corrosion, but also widely used in the beginning of this century, long-distance oil and gas pipe weld corrosion, city gas pipeline network seam corrosion, heat pipe connection seam corrosion, water pipe joints and other areas of corrosion. Below meaning from pipe coating. Oil and gas steel pipe corrosion status quo oil, gas pipe coating with heat shrinkable sleeve profile, oil, gas pipe coating with heat shrinkable sleeve requirements, corrosion with heat shrink sleeve application prospects in the oil and gas industry, about five heat shrinkable sleeve in pipe coating application.