Composition: Two-component self-dry paints, one component epoxy resin, pigments, solvents composed of two components is the curing agent. Performance: drying at room temperature, dry film hardness, good adhesion, has good mechanical properties and corrosion resistance. Uses: For cement walls u, glass, steel, rubber, machinery, tanks and other painting and rendering technical requirements: Project technical indicators in the container state stir mixing, drying time showed a uniform state, h 2 dry hard work 24 fineness, not more than 60 microns bending resistance, impact strength mm 2, not less than 40 cm Adhesion (Hatch Act) Level 1 salt water, 3% NaCL solution 240h does not blister, do not refer to a rusty construction, construction before, it will be applied to clean the surface to sand-blasting method oxide, rust and other impurities cleaned, Sa2.5 level of sandblasting. 2, the second component of a component in the pre-construction and 5: 1 (by weight) were mixed, stir, curing 30 minutes after application. 3, with the distribution with the use of paint, a good mix paint, must be used within 6 hours. 4, the construction of this product should be above the ambient temperature at 10 ℃.